Paket Speaker Column Array JBL

Price Rp38,050,000.00
Availability In Stock
Item Number 0224 Posted under

Paket Speaker Column Array JBL

Terdiri dari :
4 Unit : Speaker Pasif Column Array JBL CBT50LA
1 Unit : Power Amplifier QSC ISA300TI
1 Unit : Mixer Tipe Rack Studiomaster 122BP
1 Set : Wireless Mic AKG WMS 45 Perception Handheld
1 Unit : Rak Case 12U
1 Lot : Kabel signal & Kabel Speaker

Solusi untuk keperluan tata suara ruangan kantor / ruang rapat anda,dengan desain yg ramping dan elegan cocok dengan karakter yang dinamis,dapat digunakan untuk keperluan audio indoor dan outdoor pada umumnya seperti :

  • Background Music
  • Restoran
  • Private dan Public Club House
  • Meeting Room
  • Spa
  • Outlet Mall
  • Toko Konsep
  • Taman
  • Lobby Hotel

Untuk Informasi lebih lanjut dapat menghubungi kami, Terima kasih

Speaker Column Array JBL CBT 50LA

Constant Beamwidth Technology™ Line Array Column Loudspeaker with Eight 50 mm (2 in) Drivers

The CBT 50LA, with Constant Beamwidth Technology™, represents a breakthrough in pattern control, utilizing analog delay beam-forming and amplitude tapering to accomplish consistent vertical coverage without the narrow vertical beaming and out-of-coverage lobing that are typical of straight form-factor passive column speakers.

Features :

  • Patent-pending Constant Beamwidth Technology™ provides constant directivity up to the highest frequencies and reduces out-of-coverage lobing.
  • Switchable voicing provides flat response in music mode or mid-range presence peak in speech mode.
  • Full fidelity bandwidth.
  • Dynamic SonicGuard™ overload protection
  • Built-in 70V/100V transformer, plus 8 ohm direct capability.

More Spec...

Components   : Eight 50 mm
(2 in) Full-Range
Frequency Range (-10 dB)   : 80 Hz – 20 kHz
Coverage Pattern   : Vertical 20° (1.5 kHz – 16 kHz, ±10°)
Horizontal 150° (ave, 1 kHz – 4 kHz, ±20°)
Sensitivity (2.83V@ 1m)   : 93 dB (speech mode, 2 kHz – 14 kHz)
89 dB (music mode, 300 Hz – 18 kHz)
Nominal Impedance   : 8 ohms
Power Capacity (8 ohm setting)   : 150W (600W peak), 2 hrs
100 W (400W peak), 100 hrs
Max SPL   : Speech mode: 115 dB cont ave (121 peak)
Music mode: 111 dB cont ave (117 peak)
70V/100V Transformer Taps   : 60W, 30W, 15W, (7.5W at 70V only), and 8Ω thru, via switch
Enclosure   : Fiberglass reinforced ABS cabinet, painted aluminum grille
Outdoor Capability   : IP-54 rated, per IEC529. UV, moisture and salt-spray resistant
Colors   : Black or White (-WH)
Insert Points   : Ten M6 insert points on back panel.
Mounting   : Included wall bracket provides continuously adjustable ±15 degree tilt, as well as 5 degree fixed increment points within the range. Ten threaded mounting points located on back panel conform to industry standard rectangular 108 x 51 mm (4.25 x 2.0 in) pattern for third-party bracket, or can be utilized for suspension.
Dimensions (H x W x D)   : 528 x 99 x 153 mm
(20.8 x 3.9 x 6.0 in)
Net Weight   : 4.1 kg (9.0 lb)
Included Accessories   : Wall bracket
Optional Accessories   : MTC-PC2 terminal panel cover

Mixer Rack Mount Type Studiomaster 122BP

Gain: input to output
Stereo Channel
Aux return
Tape input
EQ +-15dB
Frequency Response
Distortion (Mic to L-R output)
Faders at 0dB
3 channels at typical settings
10Hz∼35kHz  -1dB
Output levels and impendence
Left-Right balanced
Aux1/Aux2 balanced
Monitor balanced
Power requirements
Size (W ×H ×D)
Weight (net/shipping)
Balanced XLR & Jack, unbalanced RCA phono
Balanced XLR, unbalanced RCA phono
90-240V 50/60Hz ~ 35W max
482mm (19¡±) x 133mm (5.25¡±) x 165mm (6.5¡±)
3.8kg (8.4lb) / 4.9kg (10.8lb)

Power Amplifier High / Low Impedance QSC ISA300TI

  • Low-impedance and isolated 25, 70, and 100 volt outputs for distributed audio systems
  • Rear panel gain controls with 2dB detents for quick and repeatable settings
  • XLR and detachable Euro style input connectors
  • DataPort V2 for use with DPV2-compatible signal processing accessories (XC-3, SF-3, LF-3) and DSP-3/DSP-4 (with external power supply)
  • Independent defeatable clip limiters for reduced distortion
  • 50Hz or 75Hz selectable highpass filters protect speakers and prevent speaker transformer saturation with minimal effect on program material
  • Front panel indicators include power, signal, and clip
  • Covered barrier strip output connectors for safety agency compliance
  • Automatic variable-speed fan for quiet normal operation with maximum cooling on demand
  • Rear-to-front air flow keeps equipment racks cool
  • Stereo, Bridge, or Parallel operating modes
  • Comprehensive protection circuitry including DC, infrasonic, thermal overload and short circuit protection
  • 3-year warranty plus optional 3-year extended service contract
  • 25, 70, 100 volt, and low-impedance outputs available simultaneously
  • Simple barrier strip connection determines output mode

 Microphone Wireless AKG WMS 45 Handheld

  • 30 Mhz selection bandwidth (depending on local frequency plans)
  • 8 hours of operation with a single aa size battery
  • Gain control on handheld transmitter
  • Low battery indicator
  • Noiseless on/off/mute switch on handheld transmitter

The Perception Wireless Vocal Set delivers brilliant sound and is surprisingly easy to use.

The SR 45 receiver provides professional XLR and ¼” jack outputs. The audio level and squelch threshold are adjustable on the receiver.

The handheld transmitter features a spring-steel wire mesh front grill to protect the dynamic transducer from the hardships of onstage use. Its cardioid polar pattern ensures maximum gain before feedback and makes your voice cut through any mix.

The system includes an SR 45 receiver, HT 45 handheld transmitter, universal power supply with US/UK/EU adapter, SA 45 stand adapter, and one AA size dry battery.

No reviews yet. Add yours!

Your Review