Offline - Leave a message

Paket Sound System Panggung 7000w

Price Rp110,005,000.00
Availability In Stock
Item Number 0219 Posted under

Paket Sound System Panggung 7000w

Terdiri dari :

    • 2 Unit : Speaker type Passive Mid-High JBL Professional
    • 2 Unit : Subwoofer type passive JBL Professional 
    • 2 Unit : Monitor passive JBL Professional
    • 1 Unit : Mixer Allen&Heath 
    • 3 Unit : Power Amplifier Behringer 
    • 1 Unit : Equalizer DBX 
    • 1 Set : Wireless Mic AKG Headset
    • 1 Set : Wireless Mic AKG Hanheld
    • 1 Unit : Rackcase 16U
    • 1 Lot : Kabel & Konektor Installasi.

Solusi untuk keperluan tata suara panggung anda, sesuai untuk :

-Acara outdoor

– Function room hotel dll

Untuk Informasi lebih lanjut dapat menghubungi kami, Terima kasih

Speaker Pasif 2 Way JBL Professional

Dual 15″ Two-Way
Sound Reinforcement
Loudspeaker System

Features :

  • Dual JBL low frequency drivers with a 64 mm (2.5 in) diameter edgewound ribbon voice coil which provides more crosssectional wire area in the voice coil gap than round wire designs, for greater efficiency and power handling.
  • Ferro-fluid cooled compression driver with titanium diaphragm improves high frequency performance as well as system reliability.
  • The advanced network topology crossover design shapes frequency response and delivers coherent summation in the crossover region.
  • A “Quasi 3-Way” design offers the extra bass for which a dual fifteen system is designed, but without sacrificing performance in the critical mid-range. The upper woofer produces mid-frequencies and bass, while the lower woofer concentrates on bass only. The reduction in mid-range phase cancellation greatly improves midrange sound quality and coverage.
  • High-voltage capacitors and inductors with massive cores and heavy gauge wire enable the crossover network to handle high power without saturating.
  • Progressive Transition™ highfrequency waveguide provides superior coverage control, reduced distortion, and smoother frequency response.
  • The rugged, acoustically superior enclosure is constructed from 19 mm (.75 in) MDF (Medium Density Fiberboard) using advanced adhesives and mechanical fastener technology for extreme durability and improved low-frequency performance.
  • SonicGuard™ protects the highfrequency driver from excess power without interrupting the performance.
  • Non-resonant, all-steel handles are used.
  • Attractive 18-gauge perforated, steel grille protects components from damage.

Specification Detail

Power Rating   : 500 W / 2000 W
Frequency Range   : 36 Hz – 16 kHz
(-10 dB)
Dimensions
(H x W x D)
  : 1099 mm x 464 mm x 432 mm
(43.25 in x 18.25 in x 17 in)
Frequency Response   : 45 Hz – 12 kHz
(±3 dB)
Sensitivity   : 100 dB SPL
(1w/1m)
Nominal Impedance   : 4 ohms
Recommended Amplifier Power   : 500 W to 1000 W into 4 ohms
Maximum SPL   : 133 dB
Nominal Dispersion   : 90º x 50º
Crossover Frequency   : 2 kHz
Weight   : 42.6 kg (94 lb)
High Frequency Driver   : JBL 2412 1 in exit compression driver mounted on Progressive Transition™ Waveguide
Low Frequency Driver   : JBL M128 x 2
Input Connectors   : Neutrik® Speakon® NL-4 (x1); .25 in TS phone jack (x1); parallel

Subwoofer JBL Professional

18″ Compact Subwoofer

Features :

  • 18 in. compact subwoofer.
  • 350 W (continuous), 1400 W (peak) power capacity.
  • The rugged enclosure is constructed from 19 mm (.75 in) MDF (Medium Density Fiberboard) using advanced adhesives and mechanical fastener technology for durability and improved low-frequency performance. The enclosure is covered in black carpet.
  • A top mounted, cast aluminum 35 mm pole mount receptacle can receive an optional SS3BK pole to facilitate use of the JRX118SP as a base for a midhigh speaker cabinet.
  • Non-resonant, all steel handles are used.
  • Attractive 18-gauge perforated steel grille protects components from damage.
  • 35 mm pole mount receptacle for use with satellite speakers.

More Spec

Power Rating   : 350 W / 1400 W
Frequency Range   : 38 Hz – 300 Hz
(-10 dB)
Dimensions
(H x W x D)
  : 597 mm x 516 mm x 559 mm
(23.5 in x 20.3 in x 22 in)
Frequency Response   : 55 Hz – 300 Hz
(±3 dB)
Sensitivity   : 96 dB SPL
Nominal Impedence   : 4 ohms
Recommended Amplifier Power   : 350 W to 700 W into 4 ohms
Recommended Crossover Settings   : 30 Hz HPF, 24 dB / octave; 80 – 100 Hz LPF, 24 dB / octave
Maximum SPL   : 127 dB
Weight   : 32.2 kg (71 lb)
Low Frequency Driver   : JBL 2043-G
Input Connectors   : Neutrik® Speakon® NL-4 (x1); .25 in TS phone jack (x1); parallel

Stage Monitor Loudspeaker System

Features :

    more cross-sectional wire area in the voice coil gap than round wire designs, for greater efficiency and power handling.
    well as system reliability.
    in the crossover region.
    handle high power without saturating.
  • Progressive Transition™ high frequency waveguide provides superior coverage control, reduced distortion, and smoother frequency response.
  • The rugged, acoustically superior enclosure is constructed from 19 mm (.75 in) MDF (Medium Density Fiberboard) using advanced adhesives and mechanical fastener technology for extreme durability and improved low-frequency performance.
  • SonicGuard™ protects the highfrequency driver from excess power without interrupting the performance.
  • Non-resonant, all-steel handles are used.
  • Attractive 18-gauge hexagon perforated, steel grille protects components from damage.
  • Dual-angle pole-mount socket allows the speaker to tilt 10°for more uniform audience coverage.

More Detail

Power Rating   : 250 W / 1000 W
Frequency Range   : 60 Hz – 16 kHz
(-10 dB)
Dimensions
(H x W x D)
  : 572 mm x 394 mm x 318 mm
(22.5 in x 15.5 in x 12.5 in)
Frequency Response   : 70 Hz – 12 kHz
(±3 dB)
Nominal Impedance   : 8 ohms
Sensitivity   : 99 dB SPL
(1w/1m)
Recommended Amplifier Power   : 250 W to 500 W into 8 ohms
Maximum SPL   : 129 dB
Nominal Dispersion   : 90º x 50º
Crossover Frequency   : 1.8 kHz
Weight   : 19.5 kg (43 lb)
High Frequency Driver   : JBL 2412 1 in exit compression driver
mounted on Progressive
Transition™ Waveguide
Low Frequency Driver   : JBL M112-8
Input Connectors   : Neutrik® Speakon® NL-4 (x1); .25 in
TS phone jack (x1); parallel

Loudspeaker Management System DBX

Features :

  • Setup Wizard Steps Through Speaker and Amp Selection and Levels
  • Auto EQ™ Wizard with 28-Band RTA Tunes Your System For The Venue
  • AFS™ Wizard Helps Eliminate Feedback
  • Stereo Feedback Elimination with 12 feedback notch filters
  • dbx 120A Sub-harmonic Synthesizer
  • Classic dbx Input Compression
  • JBL® Speaker and Crown® Power Amp Tunings included
  • USB Firmware and Speaker Tunings Updatable via PA+ updater
  • Full time RTA function
  • Front-Panel Output Mutes
  • Pink Noise Generator (used with Auto EQ and Auto Level Wizards)
  • Linked Stereo DSP Processing for ease of use
  • 24-Bit ADC/24-Bit DAC, >113 dB Dynamic Range
  • 2-Channel XLR Input and 6-Channel XLR Output
  • 2×3, 2×4, 2×5, 2×6 Crossover Configurations
  • Dual 28-band Graphic EQ- Linked or Dual Mono
  • Stereo Multi-band Parametric EQ
  • Stereo Output Limiters
  • Output Alignment Delay
  • Power on/off Mute Circuitry
  • Front-panel RTA-M XLR input with phantom power
  • 25 User Programs/25 Factory Programs
  • Full Graphic LCD Display
  • Front Panel Input and Output Meters

  • Switchable boost/cut ranges of ±6 or ±15 dB
  • Electronically balanced/unbalanced inputs
  • Servo balanced/unbalanced outputs
  • RF filtered inputs and outputs
  • XLR, Barrier Strip, and 1/4″ TRS connectors
  • -12dB/+12dB input gain range
  • 18dB/octave 40Hz Bessel low-cut filter
  • Chassis/signal ground lift capability
  • Internal power supply transformer
  • Power-off hardwire relay bypass with 2-second power-up delay

Professional 4,000-Watt Stereo Power Amplifier with ATR (Accelerated Transient Response) Technology

Product Features:
  • 2 x 2,000 Watts into 2 Ohms; 2 x 1,400 Watts into 4 Ohms; 4,000 Watts into 4 Ohms (bridge mode)
  • ATR (Accelerated Transient Response) technology for ultimate punch and clarity
  • Switchable limiters offer maximum output level with reliable overload protection
  • Detented gain controls for precise setting and matching of sensitivity
  • Precise Power, Signal and Clip LEDs to monitor performance
  • XLR and 1/4″ TRS input connectors for compatibility with any source
  • Professional speaker connectors and “touch-proof” binding posts support most speaker wiring systems
  • Selectable low-frequency filters remove damaging infra-sound frequencies
  • Independent DC and thermal overload protection on each channel automatically protects amplifier and speakers
  • High-current toroidal transformer for ultra-high transient response and absolute reliability
  • “Back-to-front” ventilation system including air filter for reliable operation
  • “Built-like-a-tank,” impact-resistant, all-steel 2U rackmount chassis

Power Amplifier Behringer

Professional 2,000-Watt Stereo Power Amplifier with ATR (Accelerated Transient Response) Technology

Product Features:
  • 2 x 1,000 Watts into 2 Ohms; 2 x 750 Watts into 4 Ohms; 2,000 Watts into 4 Ohms (bridge mode)
  • ATR (Accelerated Transient Response) technology for ultimate punch and clarity
  • Switchable limiters offer maximum output level with reliable overload protection
  • Detented gain controls for precise setting and matching of sensitivity
  • Precise Power, Signal and Clip LEDs to monitor performance
  • XLR and 1/4″ TRS input connectors for compatibility with any source
  • Professional speaker connectors and “touch-proof” binding posts support most speaker wiring systems
  • Selectable low-frequency filters remove damaging infra-sound frequencies
  • Independent DC and thermal overload protection on each channel automatically protects amplifier and speakers
  • High-current toroidal transformer for ultra-high transient response and absolute reliability
  • “Back-to-front” ventilation system including air filter for reliable operation
  • “Built-like-a-tank,” impact-resistant, all-steel 2U rackmount chassis

Mixing Console Allen&Heath

ZED-420 is excellent for bands, houses of worship, theatres or AV applications. It has a truly professional feature set, which will fit any sound reinforcement application and professional PA hire stock. ZED-420 has Configurable USB audio in/out makes it easy to capture stereo recordings, 16 mic or line inputs plus 2 dual stereo inputs, 4-band EQ with MusiQ, 4 sub-groups, 6 auxiliary sends and a 7×2 matrix.

Features :

  • 16 mono channels
  • 2 dual stereo inputs with 4-band EQ
  • Neutrik mic XLR
  • Neutrik 1/4 inch jacks
  • Channel insert
  • Super wide gain ‘DuoPre’ mic line input
  • 4-band EQ with 2 swept mids and in/out switch
  • Illuminated mute
  • Sound image pan
  • Illuminated PFL & peak warning indicator
  • ALPS 100mm faders
  • 6 auxiliary sends (2 pre, 2 post, 2 pre/post)
  • 4 sub groups fed from each channel
  • All inputs with level control
  • 12 bar meters
  • L, R and M main mix outputs
  • 2 matrix sections available; can send output to USB
  • Individual channel 48V phantom power
  • Direct output on every mono channel
  • Peak and signal indication on every channel
  • Configurable USB stereo audio in/out
  • Master level controls on all outputs
  • Easy to use layout – all connections and controls on top surface
  • Cakewalk SONAR X1 LE bundled with mixer

Read more...


USB audio flexibility

Getting audio to and from a computer easily is now a common requirement for live sound and music production. The way this has been implemented on ZED is super-flexible and super-easy! No longer do you need to fiddle around the back of your PC to get to the soundcard inputs, only to find that the levels are all wrong and noisy. Just plug in a USB lead to your ZED, select the USB routing on the mixer and the device on your computer and that’s it! CD quality audio to and from your PC or Mac. Switches and connection through jack socket terminals provide different send/return configurations:-

Send options:

1) Main Mix Left + Right (Post-fade) 2) Main Mix Left + Right (Pre-Fade) 3) Auxes 1-2 4) Auxes 5-6 5) Matrix 1-2.

Return options:

1) To Playback input
2) To Stereo 3 channel
MusiQ

ZED-420 has a tuned 4-band EQ taken from the acclaimed GL2200 mixer, utilising MusiQ – with optimised slope (or Q factor) for equalising individual instruments.

DuoPre™

Based on the proven pre-amps from the hugely successful PA series, ZED-420 has DuoPre pre-amps, which use a two stage design, with carefully controlled amounts of gain in each stage. When amplifying the signal from the XLR input, the gain range is huge – 69dB of range to be exact – and is very evenly distributed around the gain control, meaning better control of signal level. Most of the gain comes from the first stage, so unwanted noise is kept to a minimum. Line level signals are simply plugged into the second stage of the pre-amp by using the line input jack socket, which has the great advantage of less noise when using the line input and also matching to a higher input impedance.

SONAR X1 LE – Provided Free!

We’ve included Cakewalk SONAR X1 LE with ZED-420 so you can immediately start to use it to create your own music – just add a PC and it couldn’t be easier to get going. You’ll be able to record from your ZED mixer, create tracks and arrange songs, then play back to ZED via the USB port. You can use SONAR X1 LE and your ZED mixer together in many ways – e.g. straightforward recording of a stereo mix, recording tracks individually to build up a song, or using the USB port and software as an effects loop.

Key Features

• Powered by SONAR X1 • 32 audio tracks • 64 MIDI tracks • 8 simultaneous inputs and outputs • 24-bit/96 kHz audio quality • 24 simultaneous effects • 8 simultaneous virtual instruments

Wireless Microphone AKG Headset

Features :

  • 30 MHz selection bandwidth (depending on local frequency plans)
  • 8 hours of operation with a single AA size battery
  • Rugged, “one-size-fits-all” C 544 L headworn microphone
  • Compatible with all AKG MicroMics
  • Low battery indicator
  • Smallest and lightest bodypack transmitter in its class

The Perception Wireless Sports system with its comfortable C 544 L and ultralightweight PT 45 bodypack transmitter ensures maximum user mobility for all handsfree applications. The new C 544 L headworn microphone comes with four moisture shields protecting the transducer from perspiration while you practice your favorite sport. The C 544 L uses the proven transducer of the C 555 L and is quick and easy to put on and replace.

The system comprises an SR 45 receiver, PT 45 bodypack transmitter, universal power supply with US/UK/EU adapter, C 544 L headworn microphone, and one AA size dry battery.

Wireless Microphone AKG Handheld

Specification :

  • 30 Mhz selection bandwidth (depending on local frequency plans)
  • 8 hours of operation with a single aa size battery
  • Gain control on handheld transmitter
  • Low battery indicator
  • Noiseless on/off/mute switch on handheld transmitter

The Perception Wireless Vocal Set delivers brilliant sound and is surprisingly easy to use.

The SR 45 receiver provides professional XLR and ¼” jack outputs. The audio level and squelch threshold are adjustable on the receiver.

The handheld transmitter features a spring-steel wire mesh front grill to protect the dynamic transducer from the hardships of onstage use. Its cardioid polar pattern ensures maximum gain before feedback and makes your voice cut through any mix.

The system includes an SR 45 receiver, HT 45 handheld transmitter, universal power supply with US/UK/EU adapter, SA 45 stand adapter, and one AA size dry battery.

No reviews yet. Add yours!

Your Review